Machines · All Turningmachines · Bar Automatics
GILDEMEISTER GAC 42
| Manufacturer | GILDEMEISTER |
|---|---|
| Title | GAC 42 |
| Location | Metzingen |
| Year | 1991 |
| Category | Bar Automatics · CNC Lathes · CNC Controlled Machines |
Bar Automatics
| bore (mm) | 42 |
|---|---|
| Remarks | CNC lathe with SAMECA Bar Feed, chip conveyor and pick-up |
CNC Lathes
| Turning-Ø (mm) | 42 |
|---|---|
| turning length (mm) | 150 |
| bore (mm) | 42 |
| Remarks | CNC lathe with SAMECA Bar Feed, chip conveyor and pick-up |
CNC Controlled Machines
| Remarks | CNC lathe with SAMECA Bar Feed, chip conveyor and pick-up |
|---|
Q U O T A T I O N
We are pleased to offer you ex our stock, subject to prior sale, and error in technical data excepted :
G I L D E M E I S T E R (Germany)
Universal 8-Axis CNC Controlled Lathe with Bar Feed
Model GAC 42 Year 1991 Serial No. 5.1096
Bar Ø 42 mm
Chuck Ø 140 mm
Spindle bore 56 mm
Spindle speeds (485 Nm max.) 71 – 6,300 rpm
The machine is equipped with 2 x 2-axis side cross slides,
2 x 1-axis side cut-off slides, and 1 x 2-axis turret slide.
- Turret Slide
- Surface / longitudinal travel (X5 / Z5) 40 / 274 mm
Feed / quick feed 5 / 15 m/min
Feed pressure, surface / longitudinal 600 / 1,120 daN
- Cross Slide
- Surface / longitudinal travel (X3/Z3, X4/Z4) 70/164 mm
Feed / quick feed 5 / 8 m/min
- Cut-Off Slide
- Surface travel (X1, X2) 70 mm
Feed / quick feed 5 / 8 m/min
| Spindle drive | 18 kW |
|---|---|
| Total electrical load, approx. | 25 kW - 380 V - 50 Hz |
| Weight, approx. | 4,500 kg |
Accessories / Special Features:
- * GILDEMEISTER CNC Continuous Path Control, Model EPL 2, for 8 axes, with colour monitor, electronic hand wheel and all the usual options like graphics, cycles, subprograms, parallel programming, etc.
- * 4 pieces CNC side slides: 2 pieces with surface/longitudinal axis and 2 with surface axis. Quick change system can be preset, tool shaft 20 mm, square.
- * Tool turret with 8 tool holders, Model VDI 30. 4 tool holders are driven for drilling, milling, and thread grinding with driven tools, and also for the ….
- * Rotating gripping device, chuck Ø 80mm, for back work using the linear tool holder (for max. 3 tools) which is built on the right-hand bed side.
- * Hydraulic hollow clamping device with collet chuck.
- * SAMECA Hydrostatic Bar Feed, Model MONOSAM 45.
- * Double circuit coolant device. * BMF Chip Conveyor. * Lockable sliding doors.
- * Various driven tool holders. * Operating manual. * Various other accessories.
This is a very flexible machine because of the combined advantages of the turret with driven tools, the back work, and the four CNC side slides.
Condition : Good to very good. Machine can be inspected under power.
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.
Thank you for your interest.
We have a selection of lathes available on stock. Please let us know your requirements.