Machines · All Turningmachines · CNC Lathes
TRAUB TNS 65/ 80 D
| Manufacturer | TRAUB |
|---|---|
| Title | TNS 65/ 80 D |
| Location | Metzingen |
| Year | 1990 |
| Category | CNC Lathes · CNC Controlled Machines |
CNC Lathes
| Turning-Ø (mm) | 250 |
|---|---|
| turning length (mm) | 450 |
| bore (mm) | 80 |
| power (kW) | 42 |
| Remarks | Very large spindle bore, 3 turrets, bar loading device |
CNC Controlled Machines
| Remarks | Very large spindle bore, 3 turrets, bar loading device |
|---|
Q U O T A T I O N
We are pleased to offer you ex stock, subject to prior sale and error in technical data:
T R A U B
CNC - controlled 5 axes Bar – Turning Machine
Model TNS 65 / 80 D
Year 1990 No. 359
| Bar Ø max. | 80 mm |
|---|---|
| Turning-Ø normal (chuck turn parts) | 240 mm |
| Swing-Æ above longitudinal slide max. | 450 mm, |
| Swing-Æ above cross slide max. | 320 mm, |
- Turning length / slide range max.
- 630/630 mm,
spindle speed infinitely programmable 10 - 3.150 rpm
| Feed/rapid feed range of turrets max. | 10.000/15.000 mm/min. |
|---|---|
| Turret | 1 (top) including 12 tool-holder bores per 40 mm, |
| travelling range longitudinal/cross approx. | 185/630 mm |
| 6 power driven tools, | 6,7 kW-drive |
| Turret | 2 (botttom) including 8 tool holder bores per 40 mm, |
| travelling range longitudinal/cross approx. | 175/630 mm |
| 4 power driven tools, | 1,5 kW-drive |
| Turret | 3 (back side machining) including 4 tools dia 40 mm, |
| 4 power driven tools, | 1,5 kW-drive |
| Spindle drive max. | 42 kW |
| Total electrical load | 60 kW - 380 V - 50 Hz(140A) |
- Weight
- 7.500 kg
Accessories/Special Features:
TRAUB 5 Axes-CNC-Continous Path Control Model TX 8 D including colour monitor and all the usual options, graphics, cycles, sub-programs, manual wheel etc.
- 1 x 12-Station Turrethead above turning centre and 1 x 12 Station Turrethead
underneath turning centre, as well as one 4 Station Turrethead sideways above the main spindle
for rear-side machining of turn parts each with powered tools (6/4/4)
- Main spindle-C-Axis also for opposed spindle ( Pick-up )
- Hydraulic hollow spindle clamping device RÖHM for collets in connection
with a hydraulic bar feed magazine make TRAUB, for bars up to 80 mm x 3000 mm long.
including rest and an additional hydraulic lifter for heavy bars.
- Finished parts handling system with linear gripper and with ejection of the finished parts on the conveyor
- Various tool holders also for power driven tools, also including pick-up facility (opposed spindle)
- Coolant system with chip conveyor, lockable sliding doors, adjusting microscope, etc. Machine is ideal for medium and larger series and very easy to program,
especially suitable for complete machining of complicated turn parts
Condition : good to very good – can be seen under power
Delivery : ex stock – as viewed
Payment : net – after completion of contract
We would appreciate your order – please inquire per phone, fax, email or internet at any time.