Machines · All Sheetmetal/Wire Machines/Saws · Hydraulic Presses
HYDRAP HPDb 63
| Manufacturer | HYDRAP |
|---|---|
| Title | HPDb 63 |
| Location | Metzingen |
| Year | 1985 |
| Category | Hydraulic Presses |
Hydraulic Presses
| pressure (to) | 63 |
|---|---|
| table length (mm) | 1200 |
| table width (mm) | 500 |
| Remarks | Hydraulic double column production press for cylinder head gaskets |
Q U O T A T I O N
We are pleased to offer you ex our stock, subject to prior sale and error in technical data excepted :
H Y D R A P (Germany)
Hydraulic Double-Column Press:
- Calibrating Press with Sliding Table
Model HPDb 63 Year 1985 Serial No. H 40/5273
Pressure of upper piston 63 ton
Return power 7 ton
| Stroke | 300 mm |
|---|---|
| Table size | 1,200 x 500 mm |
| Ram plate | 1,200 x 500 mm |
Mounting height, max. (without changing unit) approx. 400 mm
| Stroke speed, up / down / full load | 400 / 400 / 16 mm/sec |
|---|---|
| Daylight between columns, front | 1,350 mm |
| Daylight between columns, side | 350 mm |
| Ejector in ram, pressure / stroke | 1.2 ton / 19 mm |
| Pump drive | 11 kW |
| Total electrical load, approx. | 16 kW - 380 V - 50 Hz |
| Weight, approx. | 10,000 kg |
Machine dimensions, width x depth x height 2 x 1.8 x 3.4 m (+ pendant control)
Accessories / Special Features
- * This is a stable, double column frame press with adjustable 4x prism guides. It is equipped with:
- * Hydro-pneumatic sliding table (approx. 625 mm cross stroke) with 2 clamping areas which hold the components to be pressed and the lower tool. These are moved under the piston, then, after the pressing operation, out of the back of the machine and onto a stacking unit. This is followed by return to the starting position. This equipment can be easily removed, or rebuilt.
- * SIEMENS S5 CNC Press Control with monitor for input of all relevant process data, or for storing tool data. This allows easier and faster retooling of the machine and also supervises the transportation of parts. With pendant control panel.
- * SICK safety light barrier built on the front of the machine on the feed station.
- * Piston is equipped with an electro motor driven depth stop (stroke 300 mm), and with a hydraulic tool clamping device, as well as with a built-in hydraulic ejector.
- * Display for pressure and oil temperature, piece counter, foot switch, 2-hand release, central lubrication, hydraulic oil circulating cooling, separate electric cabinet, etc. The machine was being used for pressing the borders of cylinder head gaskets. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
We always have a large selection of presses on stock. Please let us know your requirements.