Machines · All Gear Prod. Machines · Gear Hobbing Machines
MIKRON(CH) A 33/0
| Manufacturer | MIKRON(CH) |
|---|---|
| Title | A 33/0 |
| Location | Metzingen |
| Year | 1982 |
| Category | Gear Hobbing Machines |
Gear Hobbing Machines
| gear-Ø (mm) | 80 |
|---|---|
| Modul / DP | 2 |
| axial feed (mm) | 150 |
| Remarks | Horizontal Gear Hobbing for Worms,Loading Attachment,etc. |
Q U O T A T I O N
We are pleased to offer you ex stock, subject to prior sale and error in technical data excepted:
M I K R O N (Switzerland)
Fully Automatic Gear Hobber for Worm Gears
Model A 33 / 0 Year 1982 Ser.-No. 10.09 u. 11.13
| max. gear-Æ without Workpiece magazine approx. | 80 mm |
|---|---|
| max. gear-Æ with Workpiece magazine approx. | 50 mm |
Module max. 2, / 2,5
| Axial milling length approx. | 150 mm |
|---|---|
| Max. workpiece-mounting lengths approx. | 200 mm |
Hobbing slide can be swivelled up to 90 degrees
| Hob dimensions - Æ x length | 24 - 50/63 mm |
|---|---|
| Max. radial adjustment of hob slide | 0-14/18 mm |
| Hob Shifting max. | 25 mm |
Speed Range of Hob 212 - 2.000 rpm
| Axial feed range infinitely adjustable | 0,05 - 4,0 mm/WU |
|---|---|
| radial infinitely adjustable. | 0,2 - 200 mm/min. |
| Milling spindle drive | 3 kW |
| Total electrical load | 10 kW - 50 Hz – 380 Volt |
| Weight approx. | 2.400 kg |
Accessories/Special Features:
- Fully automatic operation cycle and minimum idle times due to freely programmable
SIEMENS PLC – Control Model S 5 for all machining stages i.e. rapid feed, infeed,
Hob drive on/off, and for the loading device, tailstock, possibly for hob shifting, etc. including
Workpiece counter, program numbering, including 30 different digital display of errors
- Pneumatic workpiece-Loading and Unloading device, situated parallell to work piece axis,
actually set up for shafts approx. 140 mm long by 8 mm Ø, including pneumatic double gripper for
loading and unloading of blanks and finished workpieces.
Blank parts are stacked into interchangeable cassettes outside of machine and then put into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle quill pushes the parts in the main spindle chuck and clamps them simultaneously.
The finished parts are ejected from the main spindle then placed back into the finished parts cassette by the gripper. The whole process is electrically monitored and checked.
The complete loading facillity is encased by plexiglass.
- hydraulic work piece clamping device including collets and hydraulic ejector
- separate cooling system with magnetic separator * separate hydraulic system * various change gears
Condition : good – 1 machine can be shown under power currently, 3 Machines available
This machine is set up for machining worm gears/armature shafts used in gearboxes for car seats,
window lifters; motors etc.
Delivery : ex stock – can be inspected under power
Payment : net – after conclusion of contract
We would appreciate your order. In total we have 3 machines of the same type available.
We have a large selection of GEAR MACHINES in stock, please do not hesitate to inquire your demands.