Machines · All Gear Prod. Machines · Gear Hobbing Machines
REINECKER KGF 1
| Manufacturer | REINECKER |
|---|---|
| Title | KGF 1 |
| Location | Metzingen |
| Year | 1888 |
| Category | Gear Hobbing Machines · Thread Production Machines |
Gear Hobbing Machines
| gear-Ø (mm) | 200 |
|---|---|
| Modul / DP | 8 |
| axial feed (mm) | 2000 |
| Remarks | Horizontal Splineshaft and Threadmilling Machine old but good |
Thread Production Machines
| thread-Ø (mm) | 200 |
|---|---|
| thread-length (mm) | 2000 |
| Modul / DP | 8 |
| Remarks | Horizontal Splineshaft and Threadmilling Machine old but good |
Q U O T A T I O N
We are pleased to offer you ex our stock, subject to prior sale and error in technical data :
R E I N E C K E R (Germany)
Spline Shaft-, Long Thread (WORM) and Gear Hobbing machine
Model KGF 1
Year approx. 1956 Serial No. 41 1595
Height of centres above bed guideways 260 mm
Distance between centres 2,000 mm
Workpiece Ø, above slide rest 200 mm
Module Range 8 mm
Workspindle bore mm
| Max. hobbing depth | 35 mm |
|---|---|
| Thread leads | 1 – 1,000 mm |
| Hob Ø, min. / max. | 120 / 115 mm |
Distance from middle of workspindle to middle
of hob spindle, min. / max. 40 - 170 mm
Main spindle speeds (workpiece) 0.4 – 2 rpm
10 cutter speeds (depending on hobbing head) 29 / 102 rpm
Feed range 0.03 – 4 mm/Hobrev.
- Quick feed
- 1800 mm/Min.
| Spindle drive, approx. | 3.7 kW |
|---|---|
| Total electrical load, approx. | 4 kW - 380 V - 50 Hz |
| Weight, approx. | 5,000 kg |
External dimensions 4 x 1.40 x 1.60 m
Accessories / Special Features
- * Version KGF for Straight Spur Gears, Threads and multi start worms with a single indexing device mounted on the rear side of WP-Spindle.
- * Normal Thread Milling and Gear Hobbing Head also for hobbing Spline Shafts., equipped with various hob mandrels.
- * Workpiece support to be mounted opposite of Hob Head to carry bushes up to a WP dia of
- 150 mm, approx 15 bushes with different diameters available.
- * Single Indexing Device mounted on Workhead for a manual indexing of workpiece
- * 3-jaw chuck Ø approx. 300 mm, smaller 3-jaw-chuck with 160 dia,
- * Stillstanding steady for a * Quick feed for slide.
- * Approx. 35 change gears.
- * Differential drive for helical gears. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
Thank you for your interest. We always have a good selection of gear machines on stock.
Please let us know your requirements.