Machines · All Turningmachines · Universal Lathes
SOMAB(F) UNIMAB 400 / PL+S 3
| Manufacturer | SOMAB(F) |
|---|---|
| Title | UNIMAB 400 / PL+S 3 |
| Location | Metzingen |
| Year | 1998 |
| Category | Universal Lathes · CNC Lathes |
Universal Lathes
| center height (mm) | 200 |
|---|---|
| center distance (mm) | 900 |
| bore (mm) | 52 |
| power (kW) | 12 |
| Remarks | Cycle Controlled Turning Machines, excell. Condition, UNIMAB Control |
CNC Lathes
| Turning-Ø (mm) | 220 |
|---|---|
| turning length (mm) | 900 |
| bore (mm) | 52 |
| power (kW) | 12 |
| Remarks | Cycle Controlled Turning Machines, excell. Condition, UNIMAB Control |
Q U O T A T I O N
We are pleased to offer you ex our stock, subject to prior sale and error in technical data :
S O M A B (France)
Cycle Controlled Universal Lathe with NUM-Control
Model UNIMAB 400
Year 1996 # 52 469
Height of centres 200 mm
- Max. swing Ø over guideways
- 400 mm
Max. swing Ø over carriage/crossslide 220 mm
Distance between centres 890/915 mm
Spindle bore 52 mm
- Travel of face slide / upper slide
- 235 mm
Spindle speeds, infinitely variable 60 – 3.000 rpm
Longitudinal and facing feeds, infinitely variable 0.01 – 50 m/min.
Quick feeds, longitudinal / cross max. 15 m/min.
Feed capacity carriage, longitudinal, max. 900 daN
| Max. torque by | 60% duty ratio 5,070 Nm |
|---|---|
| Max. weight of workpiece with tailstock | 250 kg |
| Thread leads | 0.1 – 400 mm/rev |
| Spindle drive | 9/12,5 kW * Total electrical load 22 kW - 400 V - 50 Hz |
| Total Weight, approx. | 5,500 kg |
Accessories / Special Features
- * NUM (Switzerland) Cycle Control, Model 1062 T / SOMAB PL +S3 05 for 2 axes. Direct input of all turning parameters via interactive operator interface.
The appropriate software is available. Control Unit is built-into a travelling chip protection door.
- * Hardened and ground guideways.
- * The carriage and the facing slide can be also actuated by a joystick and by electronic Handwheels in all 4 directions.
- * On the cross slide is built-on a MULTIFIX Tool Holder Head Model BD for the manually quick change of Toolholders, various holders available.
- * FORKHARDT 3-Jaw Chuck, Model F 250 mounted on 52 468 and 52 469 respectivelly ROTO – S plus 250-62 mounted on 52 501 a. 52 502
- * Manually adjustable Tailstock with Morsetaper 4 quill, Central Lubrication, and movable Coolant tank with pump, some more accessories.
Condition : Excellent Condition, Machine(s) can be inspected under power. Ideal for single workpieces or
Small batch production or training Centre.
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.
Thank you for your interest.
We have a selection of lathes available on stock. Please let us know your requirements.