Machines · All Turningmachines · Universal Lathes
SEIGER SLZ 570/2
| Manufacturer | SEIGER |
|---|---|
| Title | SLZ 570/2 |
| Location | Metzingen |
| Year | 1998 |
| Category | Universal Lathes · CNC Lathes |
Universal Lathes
| center height (mm) | 290 |
|---|---|
| center distance (mm) | 2000 |
| bore (mm) | 63 |
| power (kW) | 15 |
| Remarks | CNC teach in lathe with HDH Manual Plus Cycle Control |
CNC Lathes
| Turning-Ø (mm) | 570 |
|---|---|
| turning length (mm) | 2000 |
| bore (mm) | 63 |
| power (kW) | 15 |
| Remarks | CNC teach in lathe with HDH Manual Plus Cycle Control |
Q U O T A T I O N
We are pleased to offer you ex our stock, subject to prior sale, and error in technical :
SEIGER
CNC Universal Teach-In lathe with HEIDENHAIN MANUAL M control
Model SLZ 570 / 2 x 2000
Year 1999 981 01x
| Swing-Æ above bed | 570 mm |
|---|---|
| Swing-Æ above slide | 340 mm |
| Center distance / Turning length | 2.000 mm |
| Support travel X-axis / Z-axis | 260 / 2.050 mm |
| Spindle bore | 65 mm |
Spindle speeds (2-steps) infinitely adjustable 1 – 2.500 /min
Turning torque max. 1.600 Nm
- X-axis feed max. / rapid feed max.
- 7.000 mm/min
Z-axis feed max. / rapid feed max. 10.000 mm/min
Feed force x-axis / z-axis 700 / 1.000 daN
| Tailstock taper / sleeve stroke MK | 5 / 160 mm |
|---|---|
| Spindle drive | 16 kW |
| Total electrical load approx. | 20 kW - 400 V – 50 cycles |
| Weight approx. | 4.000 kg |
Accessories/Special Features:
- This machine can be manually operated by electronic handwheels or automatically by 2-Axis-CNC-Cycle-Control HEIDENHAIN MANUAL PLUS M graphic assisted interactive programming. A colour monitor displays actual axes positions, remainig values, input of cutting data, cutting speeds (also constant cutting speed), targets (absolute and relative).
- Simple and fast programming on the machine by graphicly displayed pre-set cutting cycles of all kinds. Additionally ICP and DIN programming for HEIDENHAIN installed.
- MULTIFIX universal quick-change tool holder size “C” with interchangeable tool holder
- Manual 3-jaw chuck Æ 250 mm with moveable and Safety controlled chuck protection,
- manual tailstock with Taper MK 5 and quill stroke 160 mm
- 1 piece closed steady Ø 135 mm, 1 piece open steady running Ø 125 mm
- Coolant supply system with chip-conveyor
- Modern design with two sliding doors and movable control slide to Operators convenience.
- Central lubrication, tooling, manuals.
Condition : good condition, can be inspected under power ! Ideal machine for workshop, single-part- or small batch production !
Delivery : immediately available, FCA Metzingen
Payment : 100 % Net, after conclusion of contract, before loading
We always have a large selection of CNC turning machines available, please tell us your requirements !